applied satellite 9505 Docking Station, Руководство пользователя

Страница: 23 / 24

Installation General Use F.A.Q. Warranty Troubleshooting Appendix Safety
V2.1 [2013-1-14] 23
9505 / 9505A Docking Station
Appendix
MODEL:CC104 HW:C
SW:F1.30 OPT:0108
OK
+VER Returns model number, hardware version, software
version and option codes
<STD NEMA GPGGA STRING>
OK
+GPGGA Returns most recent GPGGA string
(GPS update rate = 1 second)
<STD NEMA GPVTG STRING>
OK
+GPVTG Returns most recent GPVTG string
(GPS update rate = 1 second)
VERBOSE MODE: [OFF|MED|HIGH]
OK
+VERBOSE=[0|1|2] Sets Verbose Mode:
0=ALL OFF
1=CSQ QUERIES SHOWN
2=ALL ACTIVITY SHOWN
LBT:[ON|OFF]
OK
+LBT=[ON|OFF] Turn LBT ON/OFF
(Valid, but not useful with Daytona)
SIGNAL CHECK IS OFF
OK
+SSRATE=[0] Turn off CSQ queries
XT Command Set
XT Commands provide a method for configuration of Docking Station operation and communication between the
Docking Station and a local PC. The XT commands must be stand-alone commands and cannot be embedded
in AT-commands or appended as multi-part commands.
Note the format of XT commands includes the + shown in the table below. For example, to retrieve version
numbers, enter “XT+VER” (not “XTVER”).
RESPONSE
COMMAND DETAILS
XT ECHO:[OFF|ON]
OK
+E[0|1] Turn ON|OFF XT command echo
SN:1234567890123456 +SN 16-digit electronic ID
CHECK EVERY [1-60] SECS
OK
+SSRATE=[1-60] Set CSQ queries to 1- 60 seconds
(<6s would monopolize system)
STATUS:[0-20],[1-5],[1-5]
OK
+STATUS STATUS, IRIDIUM BARS, GPS BARS:
0 = NOT REGISTERED
1 = READY
2 = BEING CONFIGURED VIA RJ11
3 = BEING DIALED VIA RJ11
4 = RINGING
5 = VOICE CONNECT
6 = DATA CONNECT
7 = RESERVED