
Unpacking
Preparation
Installation
Warranty
Operation
Appendix
Overview
REV-3.0 [3-17-11]
24
ComCenter-II ‘Outdoor’
Product Manual
Status and Error Tones (RJ-11/POTS interface only)
NOT READY TONE
Powering Up
Initialization
<long tone><bleep>...repeat
TONE NAME
TONE PATTERN
DESCRIPTION
NOT READY TONE
Searching for Network
<long tone><bleep>...repeat
DIAL TONE
Ready to Dial
<continuous dial tone>
PIN CODE BEFORE DIAL
Enter ASE Access
PIN CODE
<pause><bleep>...repeat
BUSY TONE
Device on Data Call
<continuous busy tone>
POOR SIGNAL
Poor Signal during Call
<bleep><bleep>
ALERT TONE + BEEP COUNT
Missing SIM Card
Alert Tone + 2 beeps
ALERT TONE + BEEP COUNT
Locked SIM Card
Alert Tone + 3 beeps
ALERT TONE + BEEP COUNT
Registration Denied
Alert Tone + 4 beeps
ALERT TONE + BEEP COUNT
Bad SIM Card
Alert Tone + 5 beeps
Appendix
MAINTENANCE SCHEDULE
·
Test system periodically to verify proper operation. Note: this procedure can be automated using the Periodic
Messaging feature
·
Replace large O-ring annually to prevent water ingress
·
Periodically clean outside surface of unit to remove any residue or contamination build up that could impair
satellite visibility.
·
Verify horizontal orientation of unit for optimum satellite visibility and there are no signal obstructions.