Applied Membranes W-G1054EM Скачать руководство пользователя страница 19

Страница: 19 / 40

Installation and Service Manual – Metered Carbon Filter

Page 19

Diagnostics

For all steps below: Press the NEXT button to proceed to the next step. Press REGEN to return to previous step or exit.

STEP 1D

Press

▼

▲

simultaneously for three seconds. If screen in step 2D does not appear in 5

seconds the lock on the valve is activated. To unlock press

▼

, NEXT,

▲

, and SET

CLOCK in sequence, then press NEXT and

▼

simultaneously for 3 seconds.

STEP 2D

Days, since last regeneration: This display shows the days since the last regeneration
occurred.

STEP 3D

Gallons, since last regeneration: This display shows the number of gallons that have been
treated since the last regeneration.

STEP 4D

Gallons used each day for last 7 days Pressing the

▲

Button will show day 1 (which

would be yesterday) and flashes the gallons used. Pressing the

▲

button again will show

day 2 (the day before yesterday) and the gallons used. Keep
pressing the

▲

button to show the gallons for days 3, 4, 5 and 6.

The

▼

button can be pressed to move backwards in the day series.

STEP 5D

Gallons, 63 day usage history: This display shows day 1 (for
yesterday) and flashes the number of gallons treated yesterday.
Pressing the

▲

button will show day 2 (which would be the day

before yesterday) and flashes the number of gallons treated on that
day. Continue to press the

▲

button to show the maximum number of

gallons treated for the last 63 days. This display will show dashes if a water meter is not
installed.

STEP 6D

Flow rate, current: Turn the water on at one or more taps in the building. The flow rate in
gallons per minute will be displayed. If flow stops the value will fall to zero in a few
seconds.

STEP 7D

Flow rate, maximum last seven days: The maximum flow rate in gallons per minute that
occurred in the last seven days will be displayed.

STEP 8D

Gallons, total used since last reset: The total number of gallons used since last reset will
be displayed.

STEP 9D

Days, total number since last reset: The total number of days the control valve has been
in service since last reset will be displayed.

STEP 10D

Regenerations, total number since last reset: The total number of regenerations that have
occurred since last reset will be displayed.

When desired, all information in Diagnostics may be reset to zero. To reset to zero,
press NEXT and

▼

buttons simultaneously to go to the Service screen, and release.

Press

▼

and

▲

simultaneously to reset diagnostic values to zero. Screen will

return to user display.

Содержание W-G1054EM







































Результаты поиска

Содержание W-G1054EM

Отзывы:

Похожие инструкции для W-G1054EM

Бренды по названию

Популярные бренды

Applied Membranes W-G1054EM, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание W-G1054EM

Отзывы:

Похожие инструкции для W-G1054EM

Бренды по названию

Популярные бренды