Applied Logic Engineering NavDive, Руководство пользователя, Страница: 16 / 28

16
1. To configure NavDive at the start of the dive in which you are expecting to navigate to
the target locations you loaded, select PRE DIVE from the MAIN MENU by pressing the
ENTER switch after powering on the NavDive unit.
Main Menu
> 1 Pre Dive
2 Start Dive
3 Post Dive
2. You will then see the following menu:
Pre Dive
> 1 Select DestFile
2
3 Main Menu
Just press the ENTER switch to select the SELECT DESTFILE option. You will then see the
following screen:
Select Dest File:
destfilename
where destfilename indicates the first destination file that you loaded onto the SD card
from the NavDive Log application program. You can scroll through the list of all
destination files that you loaded by using the LEFT and RIGHT switch.
3. Once the correct destination file is chosen and is displayed on the LCD, press the ENTER
switch. The system will then return to the PRE DIVE menu.
4. Select MAIN MENU on the PRE DIVE menu by pressing DOWN twice, then press the
ENTER switch.
5. At the MAIN MENU, select 2. START DIVE and go through the start dive process to get to
the HOME SCREEN. Then go ahead and start your dive.
Step 4 : Navigate to a target during your dive