Applied Logic Engineering NavDive, Руководство пользователя

Страница: 14 / 28

14
Advanced Use
While the basic functions of NavDive are useful, the real power of the system is in its advanced
features. The next section will detail how to save your entry point so that you can navigate
back to it and the end of your dive. We also will cover navigating to any stored position while
operating underwater.
Saving Entry Point
Typically when diving from shore, the diver will want to return to the same position after the
dive is complete. NavDive helps facilitate this by allowing you to save your GPS position when
you enter the water before you start your dive. Then at the end of your dive, you can choose
this saved entry point as a destination (more on that in the next section) to navigate back to
where you started your dive.
To save your entry point:
1) When you enter the water, just before you start your dive –
2) Go through the standard NavDive setup process detailed above and get to the Main
Menu:
Main Menu
> 1 Pre Dive
2 Start Dive
3 Post Dive
3) Press the DOWN switch on the console to move the cursor to 2 START DIVE and then
press the ENTER switch on the console. You should now see the following:
Select Dive Num:
1
4) If this is the first dive of the day, you can simply press the ENTER switch. If this happens
to be your second or third dive of the day, you can use the RIGHT switch to increment
the dive number to reflect the correct number for your next dive, followed by pressing
the ENTER switch. You should then see the following:
Save Entry?
N