APPLIED ACOUSTICS SYSTEMS 3510 PAM Portable, Руководство по эксплуатации

Страница: 48 / 74

PAM Portable Operation Manual
PAM-3510-8000/7
__________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Page
48
of
74
To add an option to the system press F5. The following screen is then displayed:
Press F1/F2 to scroll through the software options available and to see which are enabled.
The above is an example only of the options available.
Press F4 to add an option; the following screen is displayed:
Contact Applied Acoustics for the option code quoting the PAM Serial Number, current firmware
revision and option required.
Enter the code supplied by Applied Acoustics and press F1.
The code will be validated with on screen messages informing of the progress.
If the code is correct the software option will be added.
Please note some options may require firmware / hardware updates and additional cost.
F5 Diagnostics
AAE Engineer option.
This is for troubleshooting problems and includes waveform and FFT captures of the local
acoustics.