APPLIED ACOUSTICS SYSTEMS 3510 PAM Portable, Руководство по эксплуатации

Страница: 20 / 74

PAM Portable Operation Manual
PAM-3510-8000/7
__________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Page
20
of
74
V-Nav Positioning
F1: Deployment Logging
The PAM 3510 allows the deployed position or trial position to be logged to an entry (slot), this
allows the same IDs to be used on large deployments. The entry and Vector ID are logged to the
GPS position ready to be uploaded to the VNAV Software for acquisition set-up.
With GPS interfaced the status is reported, the GPS antenna should be referenced or as close as
possible to the deployment location. There are 600 entries (slots) available for storage.
Place the test transducer close to the Vector Beacon’s transducer face and press F1 to scan as the
beacon is being deployed from the vessel. If successful the table will update with the ID, GPS
Status OK and Scan Status OK, else any errors are reported.
Once logging is complete, the whole table or part can be uploaded to the VNAV application. This is
controlled by the Import TPs button on the VT Data Base Menu.
When Deployment Logging is active not GPS data is sent to the VNAV Application