12
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Steam On/Off button
4. Fabric temperature selector pushbuttons (+ and -)
5. Multilingual digital display
6. Steam button
7. Spray button
8. Comfort Grip™ handle
9. Heel rest
10. Water tank
11. AUTO CLEAN® button
12. Soleplate
Surge-of-Steam
Spray
Auto-Off
Symbols
1
2
5
6
7
8
9
10
11
12
3
4
Please read and save this Use and Care Book.
important safety instructions
When using your iron, basic safety precautions should always be followed, including the
following:
read all instructions before using.
Use iron only for its intended use.
1.
To protect against a risk of electric shock, do not immerse the iron
2.
in water or other liquids.
The iron should always be turned to
3.
OFF before plugging or unplugging from
outlet. Never yank cord to disconnect from outlet; instead grasp plug and pull to
disconnect.
Do not allow cord to touch hot surfaces. Let iron cool completely
4.
before putting away. Loop cord loosely around the iron when storing.
Always disconnect iron from electrical outlet when filling with water
5.
or emptying and when not in use.
Do not operate iron with a damaged cord or if the iron has been
6.
dropped or damaged. To avoid the risk of electric shock, do not disassemble the
iron, take it to a qualified serviceman for examination and repair. Incorrect
reassembly can cause a risk of electric shock when the iron is used.
Close supervision is necessary for any appliance being used by or near children.
7.
Do not leave iron unattended while connected or on an ironing board.
Burns can occur from touching hot metal parts, hot water, or steam.
8.
Use caution when you turn a steam iron upside down- there may be hot water in
the reservoir.
special instructions
To avoid a circuit overload, do not operate another high-wattage appliance on
1.
the same circuit.
If an extension cord is absolutely necessary, a (15-ampere for 127-volts) or
2.
(7-ampere for 220-volts) cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that it cannot be pulled or
tripped over.
save these instructons.
tamper-resistant screw
Warning: This appliance is equipped with a tamper-resistant screw to prevent
removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt
to remove the outer cover. There are no user-serviceable parts inside. Repair should
be done only by authorized service personnel.
Note:
If the power supply cord is damaged, it should be replaced by qualified
personnel or in Latin America by an authorized service center.
13
instruc
tions
