Applent Instruments AT520, Руководство пользователя

Страница: 35 / 40

Command Reference 35
The
:BEEPer command set beep to ON or OFF.
Command Syntax BEEPer {on(1),off(0)}
Parameters {on(1),off(0)}
For example
：
Tx> beep on
Query Syntax
BEEPer?
Query Response
{on,off}
For example
：
Tx> beep?
Rx> on
Constraints None
8.8.1 :BINmode
The :BINmode command sets bin mode to GD or NG.
Command Syntax BEEPer:BINmode {good,notgood(not)}
Parameters {good,notgood(not)}
For example
：
Tx> beep :bin good
Query Syntax
BEEPer:BINmode?
Query Response {good,notgood)}
For example
：
Tx> beep:bin?
Rx> good
Constraints None
8.9 FETCh Subsystem
The FETCh? subsystem command group is a sensor-only command which retrieves the
measurement data taken by measurement(s) initiated by a trigger
Figure 8-5 FETCh? Subsystem Tree
Query Syntax
FETCh?
Query Response <float>,<float>
<float>
floating point Rx
<float>
floating point Vx
For example
：
Tx> FETCh?
Rx> 1.0000e+1,1.5000e+1
Constraints None
FETCh?
BEEPer ON (1)
OFF (0)
:BINmode
GOOD
NOTgood