7
IV. FREESTANDING INSTALLATION
FIGURE 7
FREESTANDING STOVE COMPONENTS
1. STOVE COMPONENTS
The following components are included with
the Gemini XLB stove freestanding model:
(A) Gemini XLB Unit
(B) Blower Assembly
(C) Refractory Firebox Liner
(D) Damper Spring
(E) Draft Control Knob
(F) Heat Resistant Insulation Rolls
(G) Ash Pan
(H) Pedestal (Optional) (Not Shown)
2. PREPARATION
Proper preparation and planning of the installation will simplify
the job and help achieve effective operation of the unit.
(A) Select the location for the stove installation. The stove should
be positioned so that the air flows to the rest of the home in the
most direct route possible.
(B) Locate the approximate penetration point of the chimney
structure. Avoid roof areas such as valleys, ridges, dormers and
hips.
If the installation is being made on a combustible floor, place the
floor protector in position. (Section II.)
If you are using the optional freestanding base, attach it at this
time.
Place the stove in position. Check clearances. (Section II).
PREVENT CREOSOTE FIRE; INSPECT CHIMNEY
CONNECTOR AND CHIMNEY TWICE MONTHLY AND
CLEAN IF NECESSARY.
DO NOT OVERFIRE; IF UNIT OR CHIMNEY CONNECTION
GLOWS, YOU ARE OVERHEATING.
KEEP FURNISHINGS AND OTHER COMBUSTIBLE
MATERIALS A CONSIDERABLE DISTANCE AWAY FROM
APPLIANCES.
TYPE OF FUEL: WOOD ONLY
FIGURE 7-B
FREESTANDING CAUTION TAG
