VP-2
EN
Phase sequence indications
Note:
Battery replacement
The test result is to be one of light showings
below with 3 intermittent beeps in 5 seconds.
1.
1st line ahead 2nd line:
The Green light of
Detection result indication area is still on.
(1st line >> 2nd line)
2.
1st line after 2nd line:
The Red light in
Detection result indication is still on.(2nd
line >> 1st line)
3.
The same phase field indication :
The Green Light in Detection result
indication is flashing.
4.
Error indication :
The Green light and Red
light in Detection result indication are
flashing alternately. Detection result
represented the relation of Line 1 and
Line2 and Line3(Left rotary / Left rotary).
5.The phase sequence test always requires
a countercheck during which the phase
sequence must change.
Always hold the device steady during the
measurements without wobbling.
Mains failures or a lacking mains quality might
affect the correct functioning of the device.
Unscrew the battery cover Remove
discharged batteries and insert new by
respecting the correct polarity. Close the
battery cover careful.
6
