VP-2
EN
Read First
Safety Information
WARNING
Understand and follow operating instructions
carefully. Use the meter only as specified
in this manual; otherwise, the protection
provided by the meter may be impaired.
• Only touch the instrument handle for any
detection. Do not touch the tip of the
instrument while testing. When using
detector, keep your fingers behind thefinger
guards.
• Use the detector only as specified in this
manual or the protection by the detector
might be impaired
• Before use, check the instrument for
damages. Do not use the tester if damages
are detected.
• Use caution with voltages above 30 Vac
rms, 42 Vac peak,or 60 Vdc. These voltages
pose a shock hazard.
• The signal during the voltage detection does
not provide any indication of the type and
level of voltage present. when testing mains
connected cables for interruptions the user
must ensure that both lines are connected
once to phase.
• Do not use detector around explosive gas or
vapor.
• To reduce the risk of fire or electric shock do
not expose this product to rain or moisture.
• The detector must only be used under
conditions and for the purposes for which it
has been designed. Particular attention
should be paid to the safety instructions,
the technical specifications relating to
environmental conditions and the use of the
detector in dry surroundings.
1
