VP-2
EN
Phase sequence indication
1. Test on 1st line, the Red light of this mode
is flashing once/sec with beeping, keep the
test on L1 until the Green light of this mode
is stiil on.
2. Move the probe tip to 2nd line in 2
seconds, test on 2nd line the Green light of
this mode turns to flashing once/sec from
still on with beeping.
3. When test is completed the Green light of
this mode is Off and the test result is
shown on detection result indication area
as mentioned in Phase sequence
indications.
Locating line interruptions.
Red light flashing
with Beeping
1
2
3
Line 3
Line 2
Line 1
5
