Apollo AAN-4, Руководство по оборудованию

Страница: 8 / 69

3 AAN-4 Hardware Manual
© 2011 Apollo Security Inc.
· Card Reader Data Output Format: Wiegand or Mag Stripe
· Strike Time—The time duration that the strike relay will be energized for in the case of an access grant
· Held Open Time—After an access grant and a subsequent opening of the door contact, the time in which
the door contact must be closed before an alarm state is reported
· Initial Reader Mode—The access mode in which the reader will function upon powering up or when
communication has been interrupted between the AAN-4 and host. The following modes are supported:
o
Card Only—An access request is made by presenting a card to the reader. The data is verified against
the AAN-4 database to ensure that the card has a valid Facility Code and Card Number.
o
Card or PIN—Access requests are made either by presenting a card or by keying in a PIN (Personal
Identification Number) on a keypad. A card entry is process as in Card Only access mode.
o
Card & PIN—A card must be read to start the access request. If the card is valid, the user is prompted
to enter the corresponding PIN. The request is granted only if the card and PIN match.
o
Locked—No access granted. Reader ignores all cards and PIN entries.
o
Unlocked—Door strike is continuously energized and the door contact input is not monitored. Access is
not controlled.
o
Facility Code—The entire card contents are read by the AAN-4, but only the Facility Code is checked,
and if it matches a Facility Code downloaded from the programming host, access is granted.
1.4 Programming Host
To establish operating configuration and to report events, the AAN-4 controller requires connection to a
software database interface program. Configuration options including cardholders are stored in a central
database and then transmitted via a proprietary encrypted protocol to the AAN-4. Once programmed, the
AAN-4 will continue to function without connection to the host. A record of all actions that happen while there
is no connection is stored in the memory of the AAN (limited by the capacity of the memory) for reporting at a
later time when connection with the host has been re-established.
Apollo has designed the APACS software system to provide the closest integration possible to take full
advantage of the features of the AAN-4 controller. Full documentation on configuring the options of the
AAN-4 with APACS is contained in the documentation provided with the software.