Apollo AAN-4, Руководство по оборудованию

Страница: 46 / 69

41 AAN-4 Hardware Manual
© 2011 Apollo Security Inc.
DEVICE SEARCH SELECTION
a) Click "Search" to display devices on the local network. If the desired device does not display in the list,
it may be possible to program the device using the MAC Address Selection method described previously.
b) Select the device that should be programmed by clicking on it in the list. Devices can be identified by
their existing IP address and/or MAC address. To positively identify a unit, compare the MAC address in
the list with the address printed on the identification sticker on the device.
c) Enter the desired parameters. For the ENI-100, only the IP Address can be configured using this utility
(all other parameters must be configured using the web page or Telnet). For the ENI-1 Host IP Address,
Host Address Mask and Alternate Host IP address can be specified to restrict addresses that will be able
to communicate with the ENI-1.
d) Confirm programming by accessing the device at the new address using a web browser or Telnet
(ENI-100) or using the Ping utility (ENI-100 or ENI-1).
5. Additional devices can be programmed by repeating the above steps. To exit the program, click "Cancel".
NOTE: The PC which is running InitAAN and the network hardware (switch, router, etc) must be configured
to allow network broadcasts in order to be able to communicate with the ENI and other programs to allow
programming. If one or more parts of the network does not allow broadcasting it may not be possible to
configure devices using InitAAN.