9
9
CHAIN & CHAIN BOLT INSTALLATION
STEP 1.
Position the gate so that the operator is in the center of the
gate. Connect chain bolt to the chain bracket as shown on both ends of
the gate.
STEP 2.
Attach the chain to the chain bolt using the master chain link. Do not
tighten the chain bolts .
Note:
A chain breaking tool may
be required to reduce the chain to
the proper length.
STEP 3.
Check chain align-
ment with idler sprockets.
Tighten both chain bolts
allowing 1 inch of chain sag
per every 10 feet of chain.
Align chain parallel
to the gate
Idler sprocket
Note:
The gate should have
physical stops in the open and
closed position to limit over travel.
