22
Clicking
‘Data Logging’
will allow the user to log interval
measurements in a csv file while the software is open and
communicating with the sensor.
Click ‘Setup’ and the Setup Logging window appears. Click the
‘Browse button to create or select a csv file.
Select the desired sampling interval. Note that 1 second is the
minimum interval allowed. Click ‘Start’.
The data logging window will start to update at the specified
sampling interval and display the Timestamp, Light Source, and
Data Value. At the same time, data will be written to the csv file.
Note that if the csv file is open in another program new data will
not be saved to it.
The data logging window can be closed without affecting logged
data by clicking the ‘Exit’ button. The ‘Stop’ button must be clicked
to end data logging.
The about screen tells you the software and firmware versions.
These can be used to help troubleshoot if problems arise.