AM-320 Saltwater Submersible
Sensor Wand
Tightening: Connectors are designed to be firmly
finger-tightened only. There is an O-ring inside the
connector that can be overly compressed if a wrench
is used. Pay attention to thread alignment to avoid
cross-threading. When fully tightened, 1-2 threads
may still be visible.
WARNING: Do not tighten the connector by twisting
the black cable or sensor head, only twist the metal
connector (blue arrows).
Finger-tighten firmly
DEPLOYMENT AND INSTALLATION
Apogee µCache Bluetooth
®
Memory Modules (model AT-100) are designed to work with Apogee analog sensors
and the Apogee Connect mobile app for spot-check measurements and through the built-in logging feature. To
accurately measure incoming radiation, the sensor must be level. For this purpose, each sensor model comes with
a different option for mounting the sensor to a horizontal plane.
The AM-320 Saltwater Submersible Sensor Wand accessory incorporates a mounting fixture at the end of a 40 inch
segmented fiberglass wand and is well-suited for saltwater use. The wand allows the user to place the sensor in
hard reach areas such as aquariums. While sensors are fully-potted and fully submersible, the µCache should not
be submerged and should be kept in a safe, dry place.
The AL-100 leveling plate is recommended
for most sensors. To facilitate mounting to a
cross arm, the AM-110 mounting bracket is
recommended for use with the AL-100. (AL-
100 leveling plate pictured)
Содержание mCACHE
Страница 10: ...Please Note Do not let the Cache dangle...