Aplex APC-3X65 Скачать руководство пользователя страница 2

Страница: 2 / 80

APC-3X65 User Manual

Warning!_______________________________

This equipment generates, uses and can radiate radio frequency energy and if not installed and

used in accordance with the instructions manual, it may cause interference to radio

communications.

It has been tested and found to comply with the limits for a Class A computing device pursuant to

FCC Rules, which are designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a residential area is likely to

cause interference in which case the user at his own expense will be required to take whatever

measures may be required to correct the interference.

Disclaimer

This information in this document is subject to change without notice. In no event shall Aplex

Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising

from either the use or misuse of information in this document or in any related materials.

Electric Shock Hazard

– Do not operate the machine with its back cover removed. There are

dangerous high voltages inside.

Содержание APC-3X65

















































































Результаты поиска

Содержание APC-3X65

Отзывы:

Бренды по названию

Популярные бренды

Aplex APC-3X65, Руководство пользователя

Результаты поиска

Содержание APC-3X65

Отзывы:

Бренды по названию

Популярные бренды