Aplex APC-3514B, Руководство пользователя

Страница: 34 / 82

APC-3X14B User Manual
33
Chapter 3 UEFI SETUP UTILITY
3.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your system. The UEFI
chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY
when you start up the computer. Please press <F2> or <Del> during the Power-On-Self-Test
(POST) to enter the UEFI SETUP UTILITY, otherwise, POST will continue with its test routines.
If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by pressing <Ctl> +
<Alt> + <Delete>, or by pressing the reset button on the system chassis. You may also restart
by turning the system off and then back on.
3.1.1 UEFI Menu Bar
The top of the screen has a menu bar with the following selections:
Main To set up the system time/date information
Advanced To set up the advanced UEFI features
H/W Monitor To display current hardware status
Security To set up the security features
Boot To set up the default system device to locate and load the
Operating System
Exit To exit the current screen or the UEFI SETUP UTILITY
Use <
←
> key or <
→
> key to choose among the selections on the menu bar, and then press
<Enter> to get into the sub screen. You can also use the mouse to click your required item.
3.1.2 Navigation Keys
Please check the following table for the function description of each navigation key.
Navigation Key(s) Function Description
←
/
→
Moves cursor left or right to select Screens
↑
/
↓
Moves cursor up or sown to select items
+/- To change option for the selected items
<Enter> To bring up the selected screen
<F1> To display the General Help Screen
<F7> Discard changes
<F9> To load optimal default values for all the setting
<F10> To save changes and exit the UEFI SETUP UTILITY
<F12> Print screen
<ESC> To jump to the Exit Screen or exit the current screen