Rev. A2, 07/16
PG7
9
Automation Products Group, Inc.
Units of Measure (UNITS):
Allows the user to select the unit of measure to be displayed as the pressure
reading.
Options:
For gauges over 120 psi:
PSI
(pounds per square inch)
bAR
(bar)
KPA
(kilopascals)
*CUSTOM
(see “Using Custom Units” on next page)
KGCM^2
(kilograms per cubic centimeter)
MPA
(megapascals)
FTH20
(feet of water @ 60 F)
cmHG
(centimeters of mercury)
For gauges less than 120 psi:
PSI
(pounds per square inch)
bAR
(bar)
KPA
(kilopascals)
*CUSTOM
(see “Using Custom Units” on next page)
mbAR
(millibar)
INHG
(inches of mercury)
INH20
(inches of water @ 60 F)
mmHG
(millimeters of mercury)
Setting the Unit of Measure:
Step 1:
Press the
On/Off
button once to enter the main setup menu.
Step 2:
Press
(Z)
to cycle through the options until
UNITS
is displayed.
Step 3:
Press
(S)
to access the Units options.
Step 4:
Press
(Z)
to cycle through setting options until the desired unit of
measure is displayed.
Step 5:
Press
(S)
to apply the setting and return to the main setup menu.
www.
.com
1.800.561.8187
