PG7
Rev. A2, 07/16
24
Automation Products Group, Inc.
Setting the Trip Point Outputs:
Step 1:
Press the
On/Off
button once to enter the main setup menu.
Step 2:
Press
(Z)
to cycle through the options until
OUTPUT
is displayed.
Step 3:
Press
(S)
to access the Output Settings menu.
Step 4:
Press
(Z)
to cycle through the options until
T1TYPE (or T2TYPE)
is
displayed.
Step 5:
Press
(S)
to access the Trip Type setting.
Step 6:
Press
(Z)
to change the setting to the desired trip type function (see
explanation on previous pages).
Step 7:
Press
(S)
to accept the trip type setting and return to the Output
Settings menu.
Step 8:
Press
(Z)
to cycle through the Output menu options until T1PRES (or
T2PRES) is displayed.
Step 9:
Press
(S)
to enter the Trip Pressure setting. A 5-digit number will
appear with the first digit flashing.
Step 10:
Press
(Z)
to change the value of the first flashing digit (options: 0-9
or “-”).
Step 11:
Press
(S)
to accept the value of the flashing digit and advance to the
next digit. Repeat steps 10 and 11 until the desired Trip Pressure is
fully entered. After the last digit is accepted by pressing
(S)
, the display
will return to the Output Settings menu.
Step 12:
Press
(Z)
to cycle through the Output menu options until T1WIN (or
T2WIN) is displayed.
Step 13:
Press
(S)
to enter the Trip Window setting. A 5-digit number will
appear with the first digit flashing.
Step 14:
Press
(Z)
to change the value of the first flashing digit (options: 0-9).
Step 15:
Press
(S)
to accept the value of the flashing digit and advance to the
next digit. Repeat steps 14 and 15 until the desired Trip Window is fully
entered. After the last digit is accepted by pressing
(S)
, the display will
return to the Output Settings menu.
Step 11:
To exit the output menu, press
(Z)
until
EXIT
is displayed and press
(S)
to exit to the main setup menu.
www.
.com
1.800.561.8187
