APG DMS26, Руководство пользователя

Страница: 17 / 28

DIGITAL MANAGEMENT SYSTEM DMS26
15
System high pass filtering is provided for the input signal. This is the preferred location for high pass filtering as it affects
all outputs and can therefore improve inter-band phase relationships. Filter type is selectable from Butterworth, Bessel,
Linkwitz-Riley and Hardman. Filter slopes of up to 4th order or 24dB / octave are provided. Not all filter types are
available in all slopes. For example 18dB / octave Linkwitz-Riley filters do not exist.
The Hardman type filter is always described by its’ order as the filter becomes progressively steeper rather than following
a linear slope so a dB/octave description is not accurate.
Parametric Equalisation
Eight sections of equalisation are provided, two shelving filters and six fully variable parametric sections.
High and Low shelving filters
Knob A: Frequency, 10.0Hz to 25.6kHz in variable steps
Knob B: Slope, 6 to 12dB / octave in 1dB steps
Knob C: Gain, +/-15dB in 0.2dB steps
The frequency is specified as point where the filter deviates by 3dB from the gain value.
Parametric filters
Knob A : Centre Frequency, 10.0Hz to 25.6kHz in variable steps
Knob B : Width, display selectable, Q or BW (Bandwidth)
BW adjustable from 0.05 to 5 octaves in variable steps
Q adjustable from 14.2 to 0.2 in variable steps
Knob C : Gain, +/-15dB in 0.2dB steps