APF VIPOOL MJB VSD, Информация

Страница: 8 / 16

8
VSD Pump - June 17
Functions priorities:
Low High
V1 V2
V3 STOP et
OFF
C. Operation
- Press one of the «1», «2» or «3» keys to select the preset
fixed speed. If the pump is triggered after a shutdown
period, it will then start in the priming mode and then move
to the fixed speed selected. As long as the pump is in the
start-up phase, the selected speed LED flashes. Otherwise,
it starts directly at the determined speed, without going
through the initiating step.
-To stop the motor, press the «0» key. The «Power» LED
flashes, and the screen shows «OFF».
Notice : When the MJB-VSD is used with the remote control unit, the connection
to the control unit must be shut down, or unplugged from electrical supply before
setting the speed or priming duration.
D. Fixed speed settings
- Press the fixed speed key to modify, and keep it pressed
at least 3 seconds, until the speed on the screen blinks. The
speed can, now be modified with the keys : « ».
-To memorize a favorite speed, you must press “OK”. To
invalidate your choice, and keep the original speed, press
“set”.
Note: During the suction phase, the pump speed can
not be changed.