APF VIPOOL MJB VSD, Информация

Страница: 14 / 16

14
VSD Pump - June 17
7. CAUTIONS ON OPERATING THE PUMP
▪ The pump should operate without making any noise or vibrations.
▪ Check for any leaks on a regular basis.
▪ Clean the prefilter basket on a regular basis.
▪ Always stop the pump before handling the valve on your filter (6-way) on the
swimming pool’s hydraulic circuit.
▪ This electrical pool pump is fitted as standard with a flexible filter bag inserted
in the pre-filter basket. This is intended to trap fine impurities (gravel, sand, pine
needles, etc.) which can often prevent pumps from operating correctly. When
using the pump for the first time, when there is sand or pine needles present in
the pool, or if a manual broom has been used, these are situations where the use
of the flexible filter bag is essential. We therefore advise you to leave this option
permanently in position and, of course, to check and clean it regularly (at least once a week).
If the electrical pump is returned to us for after-sales service due to a blockage of the turbine from impurities larger
than the flexible filter bag’s straining capability, the item will not be repaired under warranty.
You can obtain additional flexible filter bags from your usual supplier.
Risk of injury to persons without the required qualifications. Repair and maintenance work must be carried
out by specially trained personnel.
▪ When working on the pump :
- Cut off the electricity supply
- Make sure the switch is set to “off”
- Wait for the motor to have come to a complete stop.
▪ The mechanical seal is a vital component of the pump. It should be replaced with the utmost care. It is
advisable to contact a specialist for this task.
▪ Disassembly/Re-assembly: Take the necessary precautions to avoid trapping your hands or feet.
- Clean and check all parts before reassembling them.
- Replace all worn or damaged parts (imperative).
- Make sure the seals are clean and in the correct position. We recommend you only reposition new seals.
▪ In all spare part orders, please specify: the type of pump (data plate), the pump’s serial number (data
plate), the part’s position number (exploded view), the name of the part (table and exploded view).
9. HIVERNAGE
9. WINTERING
▪ The pump must be emptied out through the plughole for anti-freezing
purposes.
Prefilter basket
Flexible pocket filter ®
8. INTERVENTION ON THE PUMP