36
5. Open the hose reel ball valve to apply material to the application area.
6. Engage the Slurry Pump. Material will begin to flow through the hose and back to
the tank through the recirculation circuit.
The XA1200 incorporates a 2-position engine throttle,
idle speed (1350 rpm) and full rpm (2500 rpm). The
engine throttle automatically increases to full rpm
whenever the slurry pump is engaged. The engine will
return to idle speed when the slurry pump is
disengaged.
7.
Moving along the seedbed, the operator should move the discharge nozzle back
and forth in a slow, even arc to ensure even distribution of the material.
Extension Hose System – Without Remote Valve
1. Connect the extension hose into the end of the discharge boom.
2. The person controlling the end of the hose directs a second operator at the
machine to control the pump ON and OFF and speed.
Since the extension hose will be experiencing full output of the pump with the
recirculation valve closed, the equipment operator and person at the end of the hose
should exercise extreme care when operating the unit on high pressure. High pressure
on the hose can exert strong forces with the potential for the hose operator to lose
control of the hose or their footing. The hose will require additional holders when
operation occurs on slopes. Turn on the pump only after the hose operator is firmly
positioned and has firm control of the hose. Failure to comply could result in minor to
moderate personal injury. Failure to comply could also result in product or property
damage.
3. When the operator is ready, signal the second operator to turn on the Slurry Pump
and slowly increase the slurry pump output until the desired discharge pressure is
reached.
4. When finished spraying, turn off the Slurry Pump and close the discharge valve. If
using fiber mulch, retain as much water as possible in the hose by elevating the
hose ends or by coupling the hose ends together.
5. If another load is required, see RELOADING PROCEDURE below. If finished for
the day, follow the DAILY CLEANING AND MAINTENANCE.
Содержание XA1200
