Apex Digital Pro MXR 100, Руководство пользователя, Страница: 6 / 18

- - 5
Starting Procedure
Before starting the machine, inspect the following:

Ensure that the fuel tank contains an adequate volume of fuel/oil mixture to complete the distance
required.

Check all 4 tires for proper tire pressure.

Check chain tension and adjust if necessary.

Check the coolant level and fill if necessary.

Verify that the chain rollers do not have improper wear.

Inspect the frame for:
o
Cracks in the metal.
o
Cracking paint which may indicate overly stressed material.

Verify that the handlebars are tight.

Check throttle for:
o
Smooth operation and sound closing.
o
Frayed strands of the cable inside the throttle housing.

Check for loose bolts and nuts, and re-torque as necessary.

Verify that the air filter is clean and properly saturated with oil.

Turn the fuel on by rotating the fuel petcock knob to the vertically downward position.
When your pre-ride inspection is complete, the ATV may be started. For a cold engine follow this procedure:
1. Reaching down to the carburetor, push down on the black choke lever.
2. Kick start the engine
3. Rev the engine in short spurts, turning the throttle no more than ¼ open until the engine will run
without the choke.
4. Verify a functional engine shut off switch by shutting off the engine.
5. Restart the engine and proceed with riding when the engine is sufficiently warm (i.e. water pump
casing is warm to the touch).