13
The rear panel
1 MAINS FUSE
Holds the mains fuse.
2 MAINS SOCKET
• Insert the plug of the mains lead into the mains socket. The
mains connector is a standard 3 pin IEC connector. The centre
terminal of the connector is directly connected to the chassis of
the equaliser.
• Connect the other end to your mains supply via a wall socket
that has a connection to earth!. Mains frequency is 50/60Hz.
IMPORTANT
*
• For units set at 100 V/120 V: use a UL listed cord set consist-
ing of a minimum 18 AWG, type SVT or SJT three conductor
cord, a maximum of 15-feet in length and a parallel blade,
grounding type attachment plug, rated 15 A, 125 V.
• For units set at 230 V(domestic USA): use a UL listed cord
set consisting of a minimum 18 AWG, type SVT or SJT three
conductor cord, a maximum of 15-feet in length and a tandem
blade, grounding type attachment plug, rated 15 A, 250 V.
• For units set at 220V/230 V - 240 V (Europe except U.K): use
a cord set consisting of a minimum 18 AWG cord and ground-
ing type attachment plug, rated 15 A, 250 V.
The cord set should have the appropriate safety approvals for
the country in which the equipment will be installed and marked
HAR.
3 MAINS VOLTAGE SELECTOR
The equaliser is designed to be operated with nominal mains
voltages of 115V and 230V. The circuits can tolerate a deviation of
±15% on the mains, covering the range 98V to132V and 195V to
264V.