Apex Digital AD-2600, Руководство пользователя

Страница: 8 / 25

A P E X D I G I T A L A D - 2 6 0 0
8
Connection to a TV
• Refer to the manual of the connected TV.
• Turn off power and unplug both units before connecting.
• If you connect the DVD video player to a video cassette recorder (VCR), or TV/VCR combination, the playback picture may
become distorted because all DVD players incorporate copyright protection circuitry by Macrovision
®
.
• Keep the DVD video player away from any tuner or radio to avoid any static or distorted sound interference from a broadcast.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortable
listening level to avoid any speaker damage.
GOOD BETTER
Connect the DVD video player with an optional S-Video
cable if the TV has an S-Video input. Do not connect the
yellow video cable if using the S-Video cable.
!
Red White Yellow
Red
White Yellow
Red
White
Black
Red
White
Black
TV Audio Input
TV Video Input
S-Video cord
(optional)
BEST
TO Pr VIDEO IN
TO Pb VIDEO IN
TO Y VIDEO IN
TO Pr
VIDEO
OUT
TO Pb
VIDEO
OUT
TO Y
VIDEO
OUT
Red
White
Red
White
When connecting YPbPr, do not connect S-Video simultaneously.
COMPONENT VIDEO OUTPUT
Component output terminals when connected to
selected TVs and monitors will produce a higher
playback picture quality. Depending on the selected
TVs and monitors, the wording of the component
input terminals may vary.
If the component video input Y, Pb, Pr are available
on your TV, connect the terminals to your TV, you can
obtain the greater picture clarity and details. If the Y,
Pb, Pr input terminals on your TV has progressive
scan, please press the I/P button on the remote
control to switch the unit to progressive output mode.