background image

9

Getting started...

GB

IE

Before you start

To avoid the risks that are always present when you use 
an electrical appliance it is important that this appliance is 
installed correctly and that you read the safety instructions 
carefully to avoid misuse and hazards. Please keep this 
instruction booklet for future reference and pass it on to any 
future owners. After unpacking the appliance please check 
that it is not damaged. If in doubt, do not use the appliance. 

Check the package and make sure you have all of the 
parts listed.

Decide on the appropriate location for your product.

If this product contains glass please take care when fitting 
or handling to prevent personal injury or damage to the 
product.

The specifications plate is available on this appliance. This 
plate displays all the necessary identification information for 
ordering replacement parts.

If you sell the appliance, give it away, or leave it behind 
when you move house, make sure you also pass on this 
manual so that the new owner can become familiar with the 

appliance and its safety warnings.

Before you start

Tools required

SILICONE

Содержание UBIND60CLCT





































Отзывы: