Apelson UBIND60CLCT, Руководство по установке

Страница: 26 / 36

2 6
Installation
Hob installation
Caution
Appendix...
GB IE
> The induction hotplate must be installed by qualified personnel or
technicians. Please never conduct the operation by yourself.
> The hob will not be installed directly above a dishwasher, fridge,
freezer, washing machine or clothes dryer, as the humidity may
damage the hob electronics
> The induction hotplate shall be installed such that better heat
radiation can be ensured to enhance its reliability.
> The wall and induced heating zone above the table surface shall
withstand heat.
> To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
Before you install the hob, make sure that
> The work surface is square and level, and no structural members interfere
with space requirements.
> The work surface is made of a heat-resistant material.
> If the hob is installed above an oven, the oven has a built-in cooling fan
> The installation will comply with all clearance requirements and applicable
standards and regulations.
> A suitable isolating switch providing full disconnection from the mains power
supply is incorporated in the permanent wiring, mounted and positioned to
comply with the local wiring rules and regulations.The isolating switch must
be of an approved type and provide a 3 mm air gap contact separation in all
poles (or in all active [phase] conductors if the local wiring rules allow for this
variation of the requirements).
> The isolating switch will be easily accessible to the customer with the hob installed.
> You consult local building authorities and by-laws if in doubt regarding installation.
> You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the
wall surfaces surrounding the hob.
When you have installed the hob, make sure that
> The power supply cable is not accessible through cupboard doors or drawers.
> There is adequate flow of fresh air from outside the cabinetry to the base of the hob.
> If the hob is installed above a drawer or cupboard space, a thermal protection
barrier is installed below the base of the hob.
> The isolating switch is easily accessible by the customer.