Apelson UBIND60CLCT, Руководство по установке

Страница: 21 / 36

21
Care and maintenance
Troubleshooting
Before calling the customer services, please check that the appliance is
correctly connected, any of the following cases are not covered by the
guarantee
> Damage caused by improper use, storage or maintenance
> Damage caused by unauthorised disassembly and repair.
> Damage caused by misuse.
> Using the ceramic hob for commercial purposes.
GB IE
In
more
detail...
If an abnormality comes up, the induction hob will enter the protective
state automatically and display corresponding protective codes:
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob and please contact the customer
services.
Error
Message
Possible Cause What to do
No pot or pot not suitable Choose the suitable pan
ER03 Water or pot on the glass over the control Clean the user interface
F1
The connection between the display board and the left
mainboard is fail
Repair is required. Telephone the customer
service number to book an engineer visit.
F2
The connection between the display board and the
right mainboard is fail
F3E
Coil temperature sensor failure. (the cooking zone
which indicator showing “E”)
F4E
Mainboard temperature sensor failure. (the cooking
zone which indicator showing “E”)
E1E Temperature sensor of the ceramic glass plate is high
E2 E Temperature sensor of the IGBT is high
Please restart after the induction hob cools
down.
E3 E Abnormal supply voltage(too high)
Repair is required. Telephone the customer
service number to book an engineer visit.
E4 E Abnormal supply voltage (too low)
E5 E
Temperature sensor failure(the cooking zone which
indicator showing “E”)