Apelson CMA6SS, Руководство пользователя

Страница: 7 / 24

7
FIRST USE/SETTING UP YOUR COFFEE MACHINE
We recommend that you read the instructions in this owner’s manual carefully before use for the best performance and to
extend the life of your appliance, as it will provide you with all the instructions you require to ensure its safe installation,
use and maintenance. Always keep this owner’s manual close to hand since you may need to refer to it in the future.
Thank you.
USING YOUR COFFEE MACHINE FOR THE
FIRST TIME
Coffee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coffee in the mill.
You should set water hardness as soon as possible
following the instructions in the “Setting water hardness”
section.
Connect the appliance to the mains electricity supply and
turn on the main switch.
The machine display “
Welcome ” for several second
then LCD displayed ”open tap”, rotate the steam knob
to “steam” position then pump is work and LCD display
“system filling”, after several second the pump is turn off
and LCD display” close tap”, rotate the steam knob to
“coffee” position, then LCD turn black.
Press ON/OFF button over 3 second then LCD display
“heating”. After several second LCD display “press rinse”,
then press “rinse” button, the machine starts work and
LCD display “rinsing” -- flow water from coffee spout. If
this program finished LCD may display “ready”
or “heating”.
When LCD display “ready” that mean we can make coffee
now, press 1 cup button, the machine will automatic start
work and coffee may flow out. We can use stand–by knob
to adjust the volume of coffee and also can be set the
aroma of coffee.
When LCD display “ready”, press 2 cup button, that mean
the volume of coffee is double than 1 cup.
When LCD display “ready”, if press “steam/hot water”
button, that mean start make steam program - The heater
keeps work on and LCD display ”heating”, if reach the
temperature, LCD Display “steam ready” next display
“open tap”, open the steam valve and steam will spray out.
You can adjust the stand by knob to control the time of
output steam.
After finish steam and if want to come bake to “coffee”
mode, press “steam/hot water” button again and LCD may
display “ready”.
When LCD display “ready”, not press any button, and
open the steam valve, then hot water may spray from the
Steam nozzle ,at the same time LCD display “hot water”.
you can close the valve to stop “hot water” at anytime.
If you want to control the volume of hot water, adjust
the stand by knob and then the output water Reach the
set volume, pump will stop and no water can flow out
and LCD display “close tap”. After you close tap LCD may
display ”ready” or “heating”.
If you press the “ON/OFF” button over 3 second the
machine will turn off at any state.
You can insert the special accessory and can make
“cappuccino” in steam mode.
IMPORTANT!
To prevent malfunction, never introduce pre-ground
coffee, freeze dried coffee, caramelized beans or anything
else which could damage the appliance. The coffee maker
is for normal use.
CHANGING AND SETTING MENU
PARAMETERS
After the appliance is ready press “P” button over 3
seconds and you can use the internal menu to modify the
following parameters and functions:
Time
Unit on
Unit off
TEMPERATURE
HARDNESS
Aroma
Cups make
Language
Display
SETTING THE TIME
To set the time, proceed as follows:
In ready state, keep on Press the “P” button then
LCD display all menu let you select and set all kind of
Parameters.
Rotate the stand-by knob let LCD display “time”, press
stand-by knob and LCD may display l “--/--“ rotate knob
let hours number flash and next rotate the number of hour
to we want to set. Press knob that mean has finish hour is
set ok.
Now LCD display “**/--“---the minute number is flash and