Apelson CMA6SS, Руководство пользователя

Страница: 13 / 24

13
CARE AND MAINTENANCE
CLEANING THE WATER TANK
Clean the water tank regularly (about once a month) with
a damp cloth and a little mild washing up liquid.
Clean to remove all washing up liquid residues, then rinse
the water tank thoroughly.
CLEANING THE SPOUTS
Clean the spouts periodically using a sponge or cloth.
Check regularly that the holes in the coffee spout are not
blocked. If necessary, use a pin to poke the hole and clean
it.
CLEANING THE PRE-GROUND COFFEE FUNNEL
Check regularly (about once a month) that the pre-ground
coffee funnel is not blocked. If necessary, remove coffee
deposits with a knife.
DANGER!
Before performing any cleaning operations the machine
must be turned off by pressing the main switch and
unplugged from the mains power supply.
Never immerse the coffee maker in water.
CLEANING THE INSIDE OF THE COFFEE MAKER
Check regularly (about once a week) that the inside of the
appliance is not dirty.
If necessary, remove coffee deposits with a knife and a
sponge. Remove the residues with a vacuum cleaner.
CLEANING THE INFUSER
When you make total 200 cup of coffee, LCD may display
”clean ready”, this state can also be make Coffee, steam,
hot water, but we suggest that you do this clean program
as soon as possible.
Proceed as follows:
When LCD display “ clean ready”. Press the rinse button
until LCD display ‘add tablet” and put a bid container
(>1L) under the spout. Open the tap and place a tablet,
close this tap. This machine will automatic start and then
LCD display “cleaning”, water will flow interruption by
spout. After about 20 minute, LCD display “empty tray”.
Extract the drip tray and clean it then LCD display ”tray
missing”. Put drip tray in original position and LCD display
”ready”. Now you have finish this clean program.
DE-SCALING
IMPORTANT!
De-scaler contains acids which may irritate the skin and
eyes.
It is vital to respect the manufacturer’s safety warnings
given on the de-scaler pack and the warning relating to
the procedure to follow in the event of contact with the
skin and eyes.
Failure to de-scale the appliance as described also
invalidates the guarantee.
Over time, constant heating up of the water used to make
the coffee leads to lime scale building up in the inner
circuits of the appliance.
When “decalcify ready” is displayed, the machine requires
de-scaling. This state can also be make Coffee, steam,
hot water, but we suggest customer to do this program as
soon as possible.
Proceed as follows: When LCD display “decalcify ready”.
Keep on push the ON/OFF button to turn off this machine.
Now LCD is black and no display.
Keep on Press the rinse button until LCD display ‘empty
tray”. Extract the drip tray and clean it then LCD display
”tray missing”.
Insert drip tray to original position. Now LCD display
“solvent in tank”, next display ‘open tap”.
Extract the tank and Take 2 piece of de-scaler to 0.5L
water and let it solvent and next put these liquid to tank.
Put tank in original position.
Now LCD display “solvent in tank” and next display “open
tap”.
Put a big container(>5L) under the steam nozzle or
connect a long tube lead water to a big container. Open
the steam/hot valve then LCD display “decalc on”, hot
water spread interruption from steam nozzle.
After about 40 minute, LCD display “close tap”, Turn off
the tap.
Now LCD display “decalc on” “empty tray”.
Extract dip tray, now LCD display “tray missing”.
Put drip tray to original position. Then LCD display “fill
water” take out tank and rinse it carefully add pure water
in and insert it to original position .
Now LCD display ” open tap” we must open this tap.
Next LCD display “decalc on” , hot water spread
interruption from steam nozzle.
After about 20 minute and LCD display “close tap”.
Turn off the cap, now LCD display “empty tray”.