manualshive.com logo in svg

Apcon ACI-3144-XR, Руководство пользователя, Страница: 31 / 90

Поделиться
Скачать
Apcon ACI-3144-XR Скачать руководство пользователя страница 31

A54-3144-XR • Rev B

31

APCON, Inc.

Chapter 4: Installation and set up

This chapter describes how to install and set up an I

NTELLA

F

LEX

 XR chassis. If you have any 

questions during installation, please contact your sales office or APCON Technical Support 
as described in 

Contact APCON

on page 10.

Plan the installation

Prepare for installation using the following requirements. 

Before you install an I

NTELLA

F

LEX

 XR chassis, perform the following tasks:

• Plan how to route all fiber-optic, power, and Ethernet cables.

• Acquire any cables you need for the installation.

• Decide which software interface, if any, you plan to use to set up and control the 

chassis.

• If you do not plan to configure the chassis over a network, locate a laptop or desktop 

computer that you can connect to the chassis for configuration.

Chapter 4

Installation and set up

Chapter 4

Plan the installation  31

Unpack the carton  33

Install the chassis  34

Connect power to the chassis  35

NOTE

All 

APCON

 equipment is intended for installation within a Restricted Access Location 

or equivalent (such as a data center), and must be installed and maintained by 
qualified technicians.

Содержание ACI-3144-XR



























































































Отзывы:

Нет отзывов