Apcon ACI-3144-XR, Руководство пользователя

Страница: 33 / 90

A54-3144-XR • Rev B 33 APCON, Inc.
ACI-3144-XR Chassis User Manual Chapter 4. Installation and set up
• Always discharge any static build-up on your person by touching a grounded bare
metal surface or an approved anti-static mat before picking up an ESD-sensitive
electronic component.
• Transport sensitive devices only in approved anti-static packaging. Do not remove
components from ESD shielding bags until necessary.
Unpack the carton
Before you unpack the carton, follow these safety precautions:
• To avoid personal injury, use more than one person to lift and move the chassis.
• To minimize system weight when moving or mounting the chassis, remove all
hot-swappable equipment from the chassis.
• Avoid lifting the chassis in a way that could result in the equipment falling and
injuring anyone. Use a cart to move equipment whenever possible.
• When lifting and moving equipment, maintain the chassis in an upright position.
The carton contains the following items:
• One ACI-3144-XR I
NTELLA
F
LEX
chassis
• Four rack-mount brackets in the accessory box with screws
• Four bottom feet (for tabletop installations)
• One 7-foot RJ-45 modular, 8-wire, straight-pinned cable
• One adapter, RJ-45 (male) to DB-9 (female)
• Blades and transceivers as ordered
• AC power cords (110 or 220V), depending on the number of AC power supplies
ordered for the chassis
• DC pluggable power cables, depending on the number of DC power supplies
ordered for the chassis
• One documentation CD
♦ To unpack the carton:
1. Inspect the unopened carton for signs of damage or water contact. If the carton is
damaged, contact your freight carrier for an inspection of the carton and contents.
2. Unpack the carton and inspect all components for damage.
3. Place components on a table or other surface near where you plan to install the
chassis.
NOTE
If any transceivers are shipped in ESD shielding bags, wait to remove them from the
bags until the moment when you actually install them in the blades.
NOTE
If any components appear damaged, contact APCON to obtain a Return
Merchandise Authorization (RMA) number and further instructions.