manualshive.com logo in svg

Apcon ACI-3144-XR, Руководство пользователя, Страница: 10 / 90

Поделиться
Скачать
Apcon ACI-3144-XR Скачать руководство пользователя страница 10

APCON, Inc.

10

A54-3144-XR • Rev B

Chapter 1. Preface

ACI-3144-XR Chassis User Manual

Contact APCON

To request technical assistance:

•

On the Web

: APCON maintains an active website that containing current information 

about the company and sales office locations, new and existing products, sales 
contacts, service, documentation, and technical support information. 

• APCON main website:

https://www.apcon.com 

• APCON Support site:

https://support.apcon.com

•

By phone:

 

• If you purchased your product from APCON, contact your sales representative 

directly.

• APCON, Inc. standard technical support is available by phone as follows: 

• By e-mail:

• Sales representative: 

[email protected]

 

• APCON technical support: 

[email protected] 

• By  mail:

APCON, Inc.
Attn: Customer Support
9255 SW Pioneer Court
Wilsonville, OR 97070 USA

1–503–682–4050 Monday—Friday, 

8

AM

—5

PM

 (U.S. Pacific Time) 

1–503–682–4059

24×7×365 FAX 

1–800–571–4793

24×7×365 for Premium Global Service Members – 
US Domestic

1–503–682–4050, 
Option 5

24×7×365 for Premium Global Service Members – 
International 

NOTE

When sending e-mail to technical support, remember to include configuration 
information about your current hardware and software. 

Содержание ACI-3144-XR



























































































Отзывы:

Нет отзывов