CRS 40 V2
Installation, operation and service manual
M2019/02a
10.4. L
IST
OF
UNITS
A
CONNECTED
TO
THE
READING
NETWORK
If you click the <Units A> link on the main page, a simple overview table with A collector units that are
currently connected to the B control unit opens. The units are identified by the RF MAC address (see
Chapter 6.1 RF RF Reading network address).
•
Time since the last contact
- time since the last connection between the collecting unit A and the
control unit B
•
Signal [dBm]
- indicates the signal strength at the last connection between the collecting unit A and
the control unit B. The number is always negative. The ideal value is between -25 and -90 dBm. With
a stronger signal (eg -17 dBm), the B module's radio module is overwritten, the lower value (say -100
dBm) may not be sufficient to make a faultless connection.
•
Number of connections
- indicates the number of connections between the unit A and the control
unit B since the last system restart.
10.5. S
YSTEM
PARAMETERS
SETTING
On this page, you can set the parameters of the reading network. You can also get help by clicking the
question mark icon for a specific item.
42 / 57
Illustration 11: A list of units A connected to the reading network
