APART MASK2, Руководство пользователя

Страница: 4 / 8

WWW.APART-AUDIO.COM
4
It is recommended to point the center of the speaker to the center of the
dedicated listening area, but this is not so critical because Mask 2 has a wide
dispersion range. Before mounting the bracket on the wall or ceiling, test-fit
the speaker-bracket combination to see if you reach the desired mounting
angle. Determine the position of the mounting holes using the bracket as a
template and drill the holes.
Using the appropriate mounting hardware, mount the bracket to the surface.
Mounting materials for solid brick walls are included. For other materials you
may need other hardware, available from your local hardware store.
Once all screws have been securely tightened, place the included screw
covers in place.
The angle can be determinded by the position of the bracket base and the
position of the H-hook on the half-sphere ball. The factory default force-
setting of this central screw is adjusted for moving the H-hook over the
semi-sphere with or without the cabinet being over the hook. It is allowed
to adjust the angle by moving the cabinet and the H-hook together after the
mounting has been realized. You can fasten or loosen the central screw to
influence the turning force of the H-hook.
Wall mounting the speaker
Now slide out the rubber security piece from the back of the speaker, slide
the speaker on the H-hook of the mounting bracket. Slide the rubber part
back in place to lock and secure the cabinet. Plug the euroblock connector
into the speaker.