APART MASK2, Руководство пользователя

Страница: 6 / 8

WWW.APART-AUDIO.COM
6
Testing the installation
Connecting the speaker
Before you can enjoy your new speakers, recheck all connections. Correct any loose connections and
avoid ‘naked’ wires causing short circuits, before using the system. Short circuits may cause damage
to other system components.
Enjoy your new MASK2 speakers !
Remove the euroblock connector from the speaker and
connect the speaker wire to the euroblock connector.
Mind the polarity marked on the back of the speaker: + is
positive, - is negative. Most speaker wires have a colour
code. Respect the colour code starting at your amplifier
up to your speakers. For distances up to 20 meters,
you can use 0.75 mm² speaker wire without any loss of
performance. For longer distances, use thicker wire. The
euroblocks accept wires up to 1.5 mm² and up to 2.5 mm²
when using special so called ‘ cable shoes’.