Apantac CP-16, Руководство пользователя, Страница: 15 / 24

APANTAC LLC, 10200 SW Allen Blvd, Beaverton, OR 97005
Support@Apantac.com , TEL: +1 503 968 3000
12

Client Destination Host Number
Allows for programming up to 16 different multiviewers for the CP-16 to control. You must
click the ‘Apply’ button below each time you select a different Host Number (multiviewer) to
refresh the page with that multiviewer’s information before changing any of the following
fields.
The following three fields apply to the particular Host Number chosen above.

Assign to AXP Ctrl Number
Enter which buttons will send their commands to this multiviewer (Host Number).
Acceptable numbers are 1 through 16. Separate the button numbers by a period character.
Setting this parameter to 0 (zero) will assign no buttons to this host, effectively disabling the
host.

Client Destination Host Name / IP
Enter the IP addresses of the Apantac Tahoma Multiviewer to be associated with the chosen
Host Number.

Client Destination Port
This is the TCP/IP port number the multiviewer receives the AXP command protocol through.
Default is '101', do not change. (All Apantac Tahoma multiviewers utilize port 101 for
receiving AXP command protocol.)