6
TO EXTINGUISH
Hold knob depressed & turn the knob clockwise to 'OFF'
Close the valve of the gas cylinder or the regulator after use.
Close the gas bottle and allow this appliance to cool before moving the appliance.
Note: Close regulator after use, allow the appliance to cool before moving.
Note: When the appliance is not in use, turn the gas cylinder OFF.
IMPORTANT SAFETY RULES
For use outdoors or in amply ventilated areas.
An amply ventilated area must have a minimum of 25% of the surface
area open.
The surface area is the sum of the walls surface.
The use of this appliance in enclosed areas can be dangerous and is
PROHIBITED.
Children and adults should be aware of the high operating
temperatures of areas above the post when operating this appliance.
Children should be carefully supervised when in the vicinity of the
appliance.
NEVER
hang anything, including clothes or any other flammable items,
on this appliance.
DO NOT
operate this appliance unless it is fully assembled with its
reflector in place.
Respect the minimum clearances from combustible materials.
MAINTENANCE
To enjoy years of outstanding performance from your appliance, make sure you perform the following maintenance
activities on a regular basis:
Keep exterior surfaces clean.
Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
While washing your unit, be sure to keep the area around the burner and pilot assembly dry at all times. If the
gas control is exposed to water in any way,
DO NOT
try to use it. It must be replaced.
Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean. Signs of possible
blockage include:
Gas odor with extreme yellow tipping of flame.
The appliance does
NOT
reach the desired temperature.
The appliance glow is excessively uneven.
Spiders and insects can nest in burner or orifices. This dangerous condition can damage the appliance and
render it unsafe for use. Clean burner holes by using a heavy duty pipe cleaner. Compressed air may help clear
away smaller particles.
Carbon deposits may create a fire hazard. If any carbon deposits develop, clean dome and engine with warm
soapy water.
Note: in a salt-air environment (such as near the sea), corrosion occurs more quickly than normal.
Frequently check the corroded areas and repair them promptly.
Ceiling/Overhang
W
all
1m
1m
