APA LI600A, Руководство пользователя

Страница: 10 / 20

LCD DISPLAY
ATTENTION (8) : This icon will flash on the LCD display, if a serious problem occurs: short-
circuit or reverse polarity. Power-off and disconnect immediately and check everything again.
Internal Battery Voltage (9)
Show´s the voltage of the jump starters battery. In order to jump-start your vehicle it has to
be above 12.8 Volts (more than 3 bars)
Internal Battery Capacity (10)
Indicates the jump starter´s battery capacity. In order to jump-start your vehicle it has to be
more than 3 bars (above 12.8 Volts). When charging, the bars will show up from bottom to
top to signify that the charging process (up to 10 hours) is running.
A flashing battery icon symbolizes an empty battery: The unit will not work until the battery is
recharged.
Ready to Boost (11)
This icon appears when the unit is ready to jump-start your vehicle.
Pre-Heating (12)
This icon appears, when the unit detects a low ambient temperature (<0
℃
or <32
°F)
. The
battery has to be warmed up in order to work properly. Please wait until the icon disappears
(up to 5 minutes), before jump-starting. Please note: At temperatures below -20
℃
or -4°F the
PRE-HEAT-function isn´t able to warm up the unit.
Car Battery Voltage (13)
Shows the current voltage of your car battery. Do not confuse it with the jump starter´s
internal battery voltage
(9) .
Over-Heat Warning (14)
This icon appears when the device is overheated. Check the ATTENTION-Symbol. Power-
off the device and wait until the unit has cooled down. This can happen when jump-starting
several times in a short period of time or at high ambient temperatures (>65
℃
or 149
°F).
TECHNICAL SPECIFICATIONS
12V Charger 12V DC, max. 0,8A
Jump Starter LI600A
Applicable scope:
Note: This information is just as a reference
and can vary upon the brand and type of car,
the age and condition of the battery and the
outer temperature.
Engine:
Displacement up to 3000ccm
Max. Continuous Current / Peak Current 300A / 600A
Battery Type LiFePo4 – lithium iron phosphate
4 pcs x 3000mAh
USB-Out 5V DC, 1A
5V DC, 2.1A
Built-In LED Flashlight Ultra-Bright, 3 LED Modes
Automatic switch-on temperature for warming
up the unit (PRE-HEAT)
<0
℃
(<32°F)
DC Output:
12V / 2A
Electrical Safeguards Protection against: overheat, overcharge, over
discharge, short-circuit, reverse polarity
Environmental Humidity
20%
～
90
％
RH
Ambient Operating Temperatures
-20 to +50
℃
(-4 to +122
°F)
Ambient Storing Temperatures
0 to +50
℃
(32 to +122
°F)
This model may be operated in EU countries.