4.Front Wheel
5.body
1.wheel cover
Fit the wheel, washer onto the front axle, and secure them to use a split pin,
fit the break into the wheel, fit the wheel cover into the wheel.
1.
Front Wheel Assembly
4.driving wheel
1.wheel cover
6.body
7.rear axle
5.gasket
double drive use this
(1WD):
Fit the motor, wheel driver, wheel washer on to the rear axle, secure
them to use a split pin. Insert the break into the wheel. Fit the wheel cover
into the wheel.
(2WD):
Fit the motor, wheel driver, wheel washer on to the rear axle, secure
them to use a split pin. Insert the break into the wheel. Fit the wheel cover
into the wheel.Repeat for the other side.
2.
Rear Wheel Assembly
3.
Steering wheel
：
Insert the steering wheel into
the end of the steering shaft,
connector the music connector
and power connector, insert
the screw and tighten it.
5.Seat
Assembly:
Remove two screws, fit the seat
cover into the vehicle body,
insert with just two screws into it
and tighten.
4.windshield and mirror
：
Put the wind frame to relevant
position. When hearing the
clicking sound, means connector
and power connector, insert the
screw and tighten it.
Power display
MP3
Power switch
Forward/backward
Footboard
