AOR AR-ALPHA, Руководство по эксплуатации

Страница: 39 / 160

37
Example of frequency entry for 162.55 MHz
Press the [ 1 ] key, [ 6 ] key, [ 2 ] key, [ . ] key, [ 5 ] key, and [ 5 ] key.
Press the [ MHz ] key.
Example of frequency entry for 954 kHz (0.954 MHz)
Press the [ 9 ] key, [ 5 ] key, and [ 4 ] key.
Press the [ kHz ] key.
Editing frequency input
If there is an error during frequency input, press the CLR key. The frequency cursor will move backward
and delete the last digit entry. Re-enter the correct number from the numeric keypad.
Aborting frequency input
If for some reason you do not wish to complete frequency input, press the key, then press the
CLR key.
2-4-1-2 Changing frequency using the main tuning dial
While in the VFO mode, a VFO frequency may be selected by using the main tuning dial, located at the
right side of the front panel. You may rotate the dial ‘clockwise’ to increase frequency or turn
‘counterclockwise’ to decrease frequency.
2-4-1-3 Changing frequency using UP arrow key or DOWN arrow key
The UP arrow key and DOWN arrow key provide a convenient method of changing frequencies.
The speed at which the receiver steps up or down depends upon the STEP SIZE, which defaults to
AUTO . In AUTO the step size, receiver mode etc. is taken from the factory pre-programmed band plan
but it may be overridden at any time.