AOR AR-ALPHA, Руководство по эксплуатации

Страница: 30 / 160

28
Configuration Setting
The receiver’s configuration can be set on this screen.
To exit this function, press the MHz key.
(8)
Press the key, then press the 8 key.
Select Memory Scan Setting
Performing the above steps will activate the select scan mode. The select scan function scans each
memory channel regardless of memory bank selection.
To exit from this function, press the
VFO key.
(9)
Press the key, then press the 9 key.
Select Memory Scan Setting
This function is available only in the memory channel receive mode.
While in the memory channel receive mode, performing the above steps will transfer the current memory
channel to the select memory. At the same time the
SEL icon will be displayed on the LCD indicating the
current memory channel has been registered to the select memory channel. If the registered memory
channel is already registered, then the select memory channel will be deleted.
To exit this function, press the VFO key.
(10)
Press the key, then press the decimal key.