AOR AR-ALPHA, Руководство по эксплуатации

Страница: 23 / 160

21
DEF
Pressing this key will illuminate a green lamp above the DEF switch.
When the AR-ALPHA is in the VFO mode, rotating the sub dial will change the receive frequency by the
preset frequency step. To change the frequency step, while the green lamp is lit, press this key again.
The sub dial frequency step setup screen will appear.
Using the numeric keypad, enter the desired frequency step followed by
kHz key.
To cancel the entry, press this key again.
When the video screen is displayed, this function is disabled.
While in the Search mode, Memory Scan mode, and Select Scan mode, the sub dial knob is used to
select the respective bank.
MAIN
Pressing this key illuminates an orange lamp above the MAIN switch.
When the AR-ALPHA is in the VFO mode, the function of the sub dial is the same as the main dial.
While the MAIN lamp is illuminated, press this switch again until the orange lamp flashes; this enables
the sub dial to change the receive frequency 10 times faster than the main dial.
Press this key again to return to the normal tuning speed.
While in the Search Mode, Memory Scan mode, and Select Scan mode, the sub dial knob is used to
select the respective bank.
Lit Rotate the sub dial to move the marker display line.
Flash
Press and hold this key until the MKR-LED flashes.
This enables the marker to move 10 times faster than its
normal speed.
Lit The frequency step changes with the designated steps.
Flash
Press and hold this key; a small window will appear on the
LCD screen. This enables setting the frequency step using
the sub dial.
Lit The sub dial operates the same as the main dial.
Flash
Press and hold this key until the MAIN-LED flashes.
Rotating the sub dial changes the receive frequency at
10 times the rate of the main dial.