Aopos T220III, Руководство пользователя

Страница: 15 / 18

2.2) Connectors
a. Interface Connectors
Refer to interface explain.
b. Power Supply Connector
This connector is used to connect the printer to an external power source.
Power Supply Connector Pin Assignments
c. Drawer Kick-out Connector (Modular Connector)
The pulse specified by ESC p or DLE DC4 is output to this connector. The host
can confirm the status of the input signal by using the DLE EOT, GS a, or GS r
commands.
1. Pin assignments: Refer to Table
2. Connector model: Printer side:
User side:
MOLEX 52065-6615 or
Rj11 telephone jack
6-position 6-contact (Rj11
telephone jack)
Drawer Kick-out Connector Pin Assignments
-26-
-27-
3. Drawer kick-out drive signal
Output signal: Output voltage: Approximately 24V
Output current: 1A or less