Aopos T220III, Руководство пользователя

Страница: 12 / 18

-21- -20-
6. Appendix
1. Product Specifications
1.1) Printing Specifications
1. Printing method:
2. Dot density:
3. Printing direction:
4. Printing width:
5. Characters per line (default):
6. Character spacing (default):
7. Printing speed:
8. High speed mode: Thermal line printing
203 dpix203 dpi
Unidirectional with friction feed
72mm (2.83 ), 576 dot positions
Font A: 48, English Font B: 24, Chinese
Font A: 0.25mm (.01 )(2dots)
220mm/second, maximum (at 24V,20C
(68F),Density level 2.Speeds are switched
automatically depending on the voltage
temperature conditions.)
Note: There may be variations in printing after switching the mode of the printing speed.
To prevent this for logo printing with ESC command, using a downloaded bit image
is recommended. Change in printing speed does not occur during down loaded bit
image printing. Printing speed may be slower depending on the data transmission
speed and cause intermittent printing. It is recommended to transmit data to the
printer as quickly as possible.
1.2) Auto Cutter
1. Partial cut: Cutting with one point left uncut
Note:
To prevent dot displacement, after cutting, paper must be fed
approximately 1mm (14/360 inches) or more before printing.
1.3) Paper Roll Supply Device
1. Supply method: Drop-in paper roll
1.4) Paper Specification
1.Paper type:
2. Form:
3.Paper width:
4. Paper roll size:
5. Specified paper:
Specified thermal paper
Paper roll
79.5 0.5mm (3.13
0.02 )
Roll diameter: Maximum 83 mm
Specified thermal roll paper;
NTP080-80
Original paper: PD 160R
(Oji Paper Mfg. Co.Ltd.)
Origianl paper: AF50KS-E
(Jujo Thermal Oy (Finland))
Original paper: P350 (F380), P310,P300
Inside: 12mm (.47 )
6. Paper roll spool diameter:
Note:
Paper must not be pasted to the paper roll spool.
1.5) Internal Buffer
Outside: 18mm (.71 )
1. Receive buffer useable 20K bytes.
2. User-defined buffer (both for user-defined characters and user-defined bit
images): 12K bytes
1.6) Electrical Characteristics
1. Supply voltage:
2. Current consumption (at 24V): 24 VDC 8% (optional power supply)
High speed mode:
Mean: Approximately 1.8A (Character font
A-N, capital letters, 36-character rolling
pattern, 42 columns printing)
Peak: Approximately 8A
Low power consumption mode:
Mean: Approximately 1.2A
Peak: Approximately 6.6A Standby:
Mean: Approximately 0.2A
Note: Maximum 1A drawer kick0out driving.