57
Tip:
When you fail to overclock, you could:
1.
Clear CMOS (JP14) to restore the default setting.
2.
After turning power on, press “Home” immediately
until the screen appears.
z
Fixed Speed:
User could define the voltage of each fan to make fan operate
in a fixed speed.
1.
If CPUFAN doesn’t be connected or operate, there would be Warning Beep.
2.
When SystemFAN or PowerFAN is connected to motherboard, if
SystemFAN or PowerFAN doesn’t work, there would be Warning Beep.
Frequency/Voltage Control
This submenu allows you to configure the CPU and memory clock.
Frequency/Voltage Control > CPU Frequency Detected
Frequency/Voltage Control > CPU Bus Frequency
T
his item allows user to overclock the bus frequency of CPU. The range is from
100 to 400.
Frequency/Voltage Control > AGP Bus Frequency
Frequency/Voltage Control > PCI Bus Frequency
These two items allow user to adjust AGP / PCI Bus Frequency. The ratio of AGP
and PCI Bus frequency is fixed at 2:1. Available options:
66.00/33.00
,
75.43/33.72
,
88.00/44.00
Frequency/Voltage Control > DRAM Requency
